TEN 60-4813

DC/DC Converter • • • • • • • TEN 60 Series, 60 Watt Wide 2:1 input voltage range High efficiency up to 91% No minimum load required Over temperature protection Under voltage lock-out circuit Remote On/Off UL 62368-1 IEC 62368-1 3-year product warranty The TEN 60 series is a family of high performance 60W DC/DC converter modules with wide 2:1 input voltage ranges in a low profile case with industry-standard 2" x 2" footprint. High efficiency allows for an operating temperature range of –40°C to 75°C. Built-in filters for both input and output minimizes the need for external filtering. Further standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics. Models Order Code Input Voltage Output Voltage Output Current Efficiency Range nom. (adjustable) max. typ. TEN 60-2410 3.3 VDC (2.97 - 3.63 VDC) 14'000 mA 89 % TEN 60-2411 5 VDC (4.5 - 5.5 VDC) 12'000 mA 90 % 12 VDC (10.8 - 13.2 VDC) 5'000 mA 90 % 15 VDC (13.5 - 16.5 VDC) 4'000 mA 90 % 18 - 36 VDC (24 VDC nom.) TEN 60-2412 TEN 60-2413 TEN 60-2415 24 VDC (21.6 - 26.4 VDC) 2'500 mA 89 % TEN 60-4810 3.3 VDC (2.97 - 3.63 VDC) 14'000 mA 89 % 5 VDC (4.5 - 5.5 VDC) 12'000 mA 91 % 12 VDC (10.8 - 13.2 VDC) 5'000 mA 90 % 15 VDC (13.5 - 16.5 VDC) 4'000 mA 90 % 24 VDC (21.6 - 26.4 VDC) 2'500 mA 90 % TEN 60-4811 36 - 75 VDC (48 VDC nom.) TEN 60-4812 TEN 60-4813 TEN 60-4815 Options TEN-HS3 - Optional Heat Sink: www.tracopower.com/products/ten-hs3.pdf www.tracopower.com September 20, 2023 Page 1 / 5 TEN 60 Series, 60 Watt Input Specifications Input Current 24 Vin models: 100 mA typ. (3.3 Vout model) 130 mA typ. (5 Vout model) 50 mA typ. (12 Vout model) 50 mA typ. (15 Vout model) 50 mA typ. (24 Vout model) 48 Vin models: 80 mA typ. (3.3 Vout model) 90 mA typ. (5 Vout model) 30 mA typ. (12 Vout model) 30 mA typ. (15 Vout model) 30 mA typ. (24 Vout model) 24 Vin models: 2'260 mA typ. (3.3 Vout model) 2'940 mA typ. (5 Vout model) 2'900 mA typ. (12 Vout model) 2'900 mA typ. (15 Vout model) 2'940 mA typ. (24 Vout model) 48 Vin models: 1'140 mA typ. (3.3 Vout model) 1'450 mA typ. (5 Vout model) 1'450 mA typ. (12 Vout model) 1'450 mA typ. (15 Vout model) 1'470 mA typ. (24 Vout model) 24 Vin models: 50 VDC max. (100 ms max.) 48 Vin models: 100 VDC max. (100 ms max.) 24 Vin models: 14.5 VDC min. / 15.5 VDC typ. / 17.5 VDC max. 48 Vin models: 31 VDC min. / 32 VDC typ. / 35.5 VDC max. 24 Vin models: 6'300 mA (slow blow) 48 Vin models: 3'150 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type - At no load - At full load Surge Voltage Under Voltage Lockout Recommended Input Fuse Input Filter Output Specifications Output Voltage Adjustment See application note: Voltage Set Accuracy Regulation Ripple and Noise (20 MHz Bandwidth) Capacitive Load - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation –10% to +20% (24 Vout models) ±10% (other output models) (By external trim resistor) www.tracopower.com/overview/ten60 Output power must not exceed rated power! ±1% max. 0.2% max. 0.5% max. 75 mVp-p typ. 75 mVp-p typ. 100 mVp-p typ. 100 mVp-p typ. 200 mVp-p typ. 36'000 µF max. 20'400 µF max. 3'550 µF max. 2'300 µF max. 885 µF max. Not required ±0.02 %/K max. 20 ms max. Continuous, Automatic recovery 150% typ. of Iout max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 TEN 60 Series, 60 Watt Overvoltage Protection Transient Response 112 - 164% of Vout nom. (depending on model) 3.7 - 5.4 VDC (3.3 VDC model) 5.6 - 7 VDC (5 VDC model) 13.8 - 17.5 VDC (12 VDC model) 16.8 - 20.5 VDC (15 VDC model) 30 - 33 VDC (24 VDC model) 8% max. (25% Load Step) 250 µs typ. (25% Load Step) - Response Deviation - Response Time Safety Specifications Safety Standards EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten60 PD 2 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge Ext. input component: - Conducted RF Disturbances - PF Magnetic Field Continuous: 1 s: EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) www.tracopower.com/overview/ten60 EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A KY 220 µF / 100 V EN 61000-4-6, 10 Vrms, perf. criteria A EN 61000-4-8, 100 A/m, perf. criteria A EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Over Temperature Protection Switch Off - Protection Mode - Measurement Point Cooling System Sense Function 95% max. (non condensing) –40°C to +75°C +110°C max. –55°C to +125°C Depending on model See application note: www.tracopower.com/overview/ten60 120°C typ. (Automatic recovery at 100°C typ.) Case Natural convection (20 LFM) 10% max. of Vout nom. (If sense function is not used, sense pins should be connected to output pins.) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TEN 60 Series, 60 Watt Remote Control - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process Environment - Input to Output, 60 s - Input to Case, 60 s - Output to Case, 60 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF - Vibration - Mechanical Shock - Thermal Shock Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance On: 3.0 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 4 mA typ. -0.5 to 1.0 mA 2'000 m max. 270 - 330 kHz (PWM) 300 kHz typ. (PWM) Functional Insulation 1'600 VDC 1'600 VDC 1'600 VDC 1'000 MΩ min. 1'500 pF max. 410'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf MIL-STD-810F 7.7 g, 3 axis, random waveform, 60 min MIL-STD-810F 50 g, 3 axis, terminal peak sawtooth, 11 ms MIL-STD-810F -55°C to +125°C, 72 cycles, 30 min each Copper, Nickel plated Non-conductive FR4 (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Metal Case PCB Mount THD (Through-Hole Device) 2" x 2" Lead-Free Wave Soldering 265°C / 10 s max. 60 g 10.5 K/W typ. 8.4 K/W typ. (with Heat Sink) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 527286fc-5b1c-4797-b181-26e69d91a288 - Case to Ambient Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten60 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TEN 60 Series, 60 Watt 7 1 (0.400) 2 10.16 Bottom view 5.08 3 6 5 (0.50) 12.7 Pinout 8 (0.200) 5.08 7.62 5.08 7.62 7.62 (0.300) (0.200) (0.300) (0.200) (0.300) 50.8 (2.00) Outline Dimensions 4 5.6 (0.22) 45.72 (1.800) 10.2 (0.40) 50.8 (2.00) Pin Single 1 +Vin (Vcc) 2 –Vin (GND) 3 Remote On/Off 4 –Sense 5 +Sense 6 +Vout 7 –Vout 8 Trim Dimensions in mm (inch) Pin diameter: 1.0 ±0.1 (0.04 ±0.004) Tolerances: x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5